Asymmetric α‐Hydroxylation of Tetralone‐Derived β‐Ketoesters by Using a Guanidine–Urea Bifunctional Organocatalyst in the Presence of Cumene Hydroperoxide

Highly enantioselective catalytic oxidation of 1‐tetralone‐derived β‐keto esters was achieved by using a guanidine–urea bifunctional organocatalyst in the presence of cumene hydroperoxide (CHP), a safe, commercially available oxidant. The α‐hydroxylation products were obtained in 99 % yield with up to 95 % enantiomeric excess (ee). The present oxidation was successfully applied to synthesize a key intermediate of the anti‐cancer agent daunorubicin ( 2 ).     

Elution behaviour and environmental impact of heavy metals and rare-earth elements from volcanic ashes of Mt. Oyama,Miyake Island

To obtain information on the environmental impact of materials eluted from volcanic ashes of Mt. Oyama, Miyake Island, which erupted in July 2000, the dissolution behaviours of heavy metals and rare-earth elements from the volcanic ashes were examined. The most important characteristic of the Mt. Oyama eruption is that sulphur dioxide (SO₂) gas has been continuously released, and all persons living on Miyake Island have been required to evacuate. To estimate in terms of the volcanic eruption using SO₂ gas, the ash nature in Mt. Usu, Hokkaido, was also examined and compared with that in Mt. Oyama. When rain water mixed the ashes, the water from the ashes of Mt. Oyama became acidic because of the sulphuric acid. Therefore, SO₂ gas in Mt. Oyama can accelerate the dissolution of protons and heavy metals in the ashes, whereas the rain water in Mt. Usu was not acidic and the dissolution of the heavy metals was not so evident compared with that in the case of Mt. Oyama. With this sulphuric acid, heavy metals such as As, Cd, Pb and Hg in the ashes in Mt. Oyama easily dissolved owing to the low pH. The ashes in Mt. Oyama had been released for eight years and the amount of fallen ashes was estimated to be 33 billion tons. The weights of the harmful heavy metals in the volcanic ashes, such as As, Cd, Pb and Hg, were estimated to be 3.8?×?10², 1.3?×?10³, 1.1?×?10³ and 29?kg, respectively, and these heavy metals were dissolved and diluted in seawater. Therefore, the concentration and species (chemical form) of these metals should be carefully monitored in the future. Moreover, SO₂ gas, which has a direct effect on human health and has been monitored continuously, causes other effects, such as facilitation of metal ion elution and rock aeration.     

Practical Synthesis of (20S)‐10‐(3‐Aminopropyloxy)‐7‐ethylcamptothecin,a Water‐Soluble Analogue of Camptothecin

A robust, practical synthesis of (20S)‐10‐(3‐aminopropyloxy)‐7‐ethylcamptothecin (T‐2513, 5 ), which is a water‐soluble analogue of camptothecin, has been developed. The key step in this synthesis is a highly diastereoselective ethylation at the C20 position by using N‐arylsulfonyl‐(R)‐1,2,3,4‐tetrahydroisoquinoline‐3‐carboxylic acid ester as a chiral auxiliary, which affords the key intermediate ethyl‐(S)‐2‐acyloxy‐2‐(6‐cyano‐5‐oxo‐1,2,3,5‐tetrahydroindolizin‐7‐yl)butanoate ( 8 k ) in 93 % yield and 87 % de. Optically pure compound 8 k was obtained by a single recrystallization from acetone and its further elaboration through Friedlander condensation afforded compound 5 . This synthesis does not require any chromatographic purification steps and can provide compound 5 on a multi‐gram scale in 6.3 % overall yield (16 steps).     

Adsorption behavior of VII group elements on tertiary pyridine resin in hydrochloric acid solution

We investigated the adsorption behaviors of technetium and rhenium on tertiary pyridine resin in hydrochloric acid solution. Technetium has a little larger distribution coefficient in higher concentration of hydrochloric acid region than rhenium. However, the tendency of adsorption behavior of technetium and rhenium is similar. We concluded that the rhenium can be used as the substitute for technetium. Adsorption behaviors of platinum group elements were also investigated. The separation of technetium from platinum group elements is discussed.     

Stein's phenomenon in estimation of means restricted to a polyhedral convex cone

This paper treats the problem of estimating the restricted means of normal distributions with a known variance, where the means are restricted to a polyhedral convex cone which includes various restrictions such as positive orthant, simple order, tree order and umbrella order restrictions. In the context of the simultaneous estimation of the restricted means, it is of great interest to investigate decision-theoretic properties of the generalized Bayes estimator against the uniform prior distribution over the polyhedral convex cone. In this paper, the generalized Bayes estimator is shown to be minimax. It is also proved that it is admissible in the one- or two-dimensional case, but is improved on by a shrinkage estimator in the three- or more-dimensional case. This means that the so-called Stein phenomenon on the minimax generalized Bayes estimator can be extended to the case where the means are restricted to the polyhedral convex cone. The risk behaviors of the estimators are investigated through Monte Carlo simulation, and it is revealed that the shrinkage estimator has a substantial risk reduction.     

Numerical analysis of turbulent flow separation in a rectangular duct with a sharp 180‐degree turn by algebraic Reynolds stress model

Turbulent flow in a rectangular duct with a sharp 180‐degree turn is difficult to predict numerically because the flow behavior is influenced by several types of forces, including centrifugal force, pressure‐driven force, and shear stress generated by anisotropic turbulence. In particular, this type of flow is characterized by a large‐scale separated flow, and it is difficult to predict the reattachment point of a separated flow. Numerical analysis has been performed for a turbulent flow in a rectangular duct with a sharp 180‐degree turn using the algebraic Reynolds stress model. A boundary‐fitted coordinate system is introduced as a method for coordinate transformation to set the boundary conditions next to complicated shapes. The calculated results are compared with the experimental data, as measured by a laser‐Doppler anemometer, in order to examine the validity of the proposed numerical method and turbulent model. In addition, the possibility of improving the wall function method in the separated flow region is examined by replacing the log‐law velocity profile for a smooth wall with that for a rough wall. The analysis results indicated that the proposed algebraic Reynolds stress model can be used to reasonably predict the turbulent flow in a rectangular duct with a sharp 180‐degree turn. In particular, the calculated reattachment point of a separated flow, which is difficult to predict in a turbulent flow, agrees well with the experimental results. In addition, the calculation results suggest that the wall function method using the log‐law velocity profile for a rough wall over a separated flow region has some potential for improving the prediction accuracy. Copyright © 2007 John Wiley & Sons, Ltd.     

An Accurate Characterization of CRT Monitor (I) Verifications of Past Studies and Clarifications of Gamma

CRT monitors are widely used to view images on the Internet. The color images on the computer graphic display can be printed out or displayed on other monitors through the Internet, and color matching between the original and the reproduction is very important. The color management systems (CMSs) are useful for the color matching. CMSs utilize device profiles, in which color characteristic information is stored, and these profiles are generated by device characterization. Thus, an accurate characterization of the monitor is essential for better color matching. CRT monitor characteristics can be described by the tone reproduction curves (TRCs) of each channel, and color additive matrix. In this paper, these characteristics were investigated from a physical point of view. Various kinds of flare and the interdependence among the channels were also investigated and verified. The definition of the term “gamma” is clarified, which is very often used to describe the TRC. Various definitions are compared and a new definition of S-γ is proposed.     

Oxidative degradation of poly(isophthaloylhydrazine‐1,2‐diyl)s

The condensation polymerization of isophthalodihydrazide and diphenyl isophthalate affords poly(isophthaloylhydrazine‐1,2‐diyl). High‐molecular‐weight poly(5‐tert‐butylisophthaloylhydrazine‐1,2‐diyl) is prepared by the polycondensation of 5‐tert‐butylisophthalodihydrazide and bis(4‐nitrophenyl) 5‐tert‐butylisophthalate in NMP at 100 °C. T_d of the poly(diacylhydrazine) is observed above 300 °C. No T_g is observed below T_d. The high‐molecular‐weight poly(diacylhydrazine) exhibits a film‐forming ability. The poly(diacylhydrazine) decomposes on treatment with an oxidant such as sodium hypochlorite solution to obtain the corresponding carboxylic acid and nitrogen. However, poly(diacylhydrazine) was stable to oxygen and hydrogen peroxide even in the presence of transition metal ions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6255–6262, 2008